Projekt settings - Telegramm Monitor

Telegrams can be recorded in the background with the telegram monitor. The telegrams are not stored on the SD card but in the RAM, therefore this recording does not limit the life of the SD card.

Aufruf menu project settings - Telegrammonitor

Activate monitor	Activates the telegram monitor
Max. Telegrams	The maximum number of data records is set here. If this number is exceeded, the oldest data records are overwritten with the newest ones.
Filter	All: All telegrams are recorded. KNX only: Only KNX telegrams are recorded (all addresses less than or equal to 31/7/255). Internal only: Only internal telegrams are recorded (all address greater than 31/7/255) Filter: Only the addresses entered in the filter table are recorded. The filter table is shown with this selection only.
Filter table	Here addresses can be added as filters. Drag addresses from the variable window into this table to add addresses. All addresses of the table are always recorded, across all tabs. The check mark in front of the address only controls whether the telegrams of this address are shown in the table. This way the display can be changed at any time without losing recorded telegrams. Several filter lists can be created as freely named tabs; the table shows the telegrams of the currently selected tab.
Filter table view	The input field below the table limits the display to certain addresses, recording is not affected. Several addresses can be entered separated by spaces or semicolons. Without a wildcard the address has to match exactly. The asterisk stands for any characters, for example 10/10/* shows all addresses of the middle group 10/10 and 10* all addresses of the main group 10. The destination and the source address are compared, so the telegrams of a single device can be shown as well (for example 1.1.*).
Save permanently	With this option, telegrams are stored persistently on a daily basis. Please note: Frequent saving can reduce the lifetime of the internal flash memory. An optional industrial memory card should be used.
Save permanently days	Number of days. If this number is exceeded, the oldest data is deleted.