KNX Assignment 1-1 KNX Assignment 1-1| This block is used to transfer one variable to another, the function corresponds to a "=" assignment from left to right. If there are several inputs, the opposite output is always assigned. In contrast to the block assignment 1-1 digital, this block has additional parameters to configure the behaviour for KNX telegrams. |
Inputs |
||
| E1-Ex | Input 1-x | Input |
Outputs |
||
| A1-Ax | Output 1-x | Output |
Parameter |
||
| Number of inputs and outputs | Number of inputs and outputs. | |
| Only write commands |
With
this option the value at the output is only assigned if the value at
the input was sent with the KNX telegram write command. Feedback
messages to the group address are ignored in this case. |
|
| Forced update outputs |
With
this option the output is always updated when a telegram is received at
the input, regardless of whether the value has changed the output
telegram is always sent. |
|