KNX Assignment 1-N KNX Assignment 1-N| This block is used to transfer one variable to several variables (multiplier). This block is used, for example, to assign the output of an AND link to several variables. In contrast to the Assignment 1-N digital block, this block has additional parameters to configure the behaviour of KNX telegrams. |
Inputs |
||
| E1 |
Input
1 |
Input |
Outputs |
||
| A1-Ax |
Output
1-x |
Outputs |
Parameter |
||
| Number of outputs | Number of outputs | |
| Only write commands | With this option the value at the output is only assigned if the value at the input was sent with the KNX telegram write command. Feedback messages to the group address are ignored in this case. | |
| Forced update outputs | With this option the output is always updated when a telegram is received at the input, regardless of whether the value has changed the output telegram is always sent. | |