KNX assignment 1-1
KNX assignment 1-1| This block transfers one variable to another; the function corresponds to an "=" assignment from left to right. With multiple inputs and outputs, the assignment is always made to the opposite output. In contrast to the block Assignment 1-1 digital, this block has additional parameters to configure the behavior with KNX telegrams. In contrast to 1-1 digital, the assignment is only executed when a telegram is also received at the input. |
Inputs |
||
| E1-Ex | Input 1-x | Input |
Outputs |
||
| A1-Ax | Output 1-x | Output |
Parameters |
||
| Number of inputs and outputs | Number of inputs and outputs. | |
| Write
commands only |
With this option the value at the output is only
assigned when the value at the input was sent with the KNX telegram command
write. Feedback on the group address
is ignored in this case. |
|
| Always update
outputs |
With this option, when a telegram is received at the input
the output is always updated; regardless of whether the value
has changed, the output telegram is always sent. |
|