Overview Jablotron alarm system



With this function block a Jablotron alarm system is connected via the RS485 interface.

Important: If the alarm system is operated via the app, special protective measures should be taken. For example, the setup of a private VPN access. Under no circumstances should the system be freely accessible from the Internet, e.g. via port forwarding.

Set the parameters Number of areas, detectors, PG outputs as they are programmed at the system and generate the variables. The system is then controlled via the addresses S/TS/US = 0=Armed, 1=Partially armed, 2 = Disarmed, feedback via "Status S/TS/US", PG outputs control via PG / Status PG.



Outputs
ER
 Error counter
 Number of communication errors

Parameters
Interface
 Type of interface:
  • Onboard: Built-in RS485 interface
  • USB: USB RS485 converter
  • Manual: Manual entry of the interface for diagnostics.
User
 User name
Password
 Password
Number of areas
 Number of areas
Number of PG outputs Number of PG outputs
Number of detectors Number of detectors

See also common parameters of all function blocks.