KNX Cyclic Send

This function block sends a value cyclically to the KNX bus. This can be used, for example, for a monitoring function (heartbeat).

Inputs
FG	Enable	Enable. At 1 the value is sent cyclically. This input is optional; if nothing is linked to the input, the block is enabled automatically.
TM	Time	Time interval for the cyclic sending in seconds. This input is optional; if nothing is linked to the input, it is sent every 5 seconds. The minimum time is 1 second.
SW	Setpoint	Value that is sent cyclically.
Outputs
A1	Variable	Variable. A variable from the KNX range must be linked to the output.
TM	Remaining time	Remaining time in seconds until the next send.
Parameters
	Apply changes	If this parameter is activated, a change of the value at input SW is sent immediately and the cycle time is restarted. Default: activated.

Inputs