Overview KNX Monitoring

With this function block, the receipt of telegrams is monitored. If the telegram is not received within an adjustable time, the error output is set. This block can be used, for example, to monitor an actual value when the sensor is set to cyclic sending; if the telegram fails to arrive, an error is output.


Inputs

E1
 Variable
 A variable must be linked to the input.
RS
 Reset
 With a positive edge at this input, the error output is reset.

Outputs
FE
 Error
 Error output
RZ
 Remaining time
 Time until the error in seconds

Parameters
Monitoring time
 Time until the error is triggered when no telegram is received.
Automatic reset
 If an error was triggered, the error output remains at 1 even when telegrams are received again. With this parameter, the error output is reset automatically as soon as telegrams are received again.
Send mail With this parameter, mail sending can be activated. On the first timeout, a mail is sent.
Address Recipient. Multiple recipients can be specified separated by semicolons.
Subject error
 Subject on timeout
Subject Ok Subject when the telegram is received again or error
Cyclic send If this parameter is greater than 0, the error mail is sent cyclically at this interval.



See also common parameters of all function blocks.