Overview MQTT ALAN

The function block MQTT ALAN integrates a multisensor of the ALAN series. The device combines sensors for room climate, air quality, brightness and a radar sensor for motion and presence in one housing and reports all values via MQTT.

Outputs
TM Temperature Measured temperature in °C.
LF Humidity Relative humidity in percent.
LD Air pressure Measured air pressure.
GS Gas Air quality index of the gas sensor.
CO CO2 CO2 content of the air in ppm.
LX Brightness Measured brightness in lux.
GX Gyrometer X Magnetic field in direction X.
GY Gyrometer Y Magnetic field in direction Y.
GZ Gyrometer Z Magnetic field in direction Z.
SX Velocity X Velocity in direction X.
SY Velocity Y Velocity in direction Y.
SZ Velocity Z Velocity in direction Z.
AX Acceleration X Acceleration in direction X.
AY Acceleration Y Acceleration in direction Y.
AZ Acceleration Z Acceleration in direction Z.
AT Acceleration temp. Temperature of the acceleration sensor.
BW Motion Reports motion in the room.
AW Presence Reports presence in the room. The radar sensor also detects people at rest.
BP Radar Raw value of the radar sensor.

Parameters

MQTT topic Topic of the device, exactly as in the MQTT settings of the device. Example: smellcell-alan-AABBCCDDEEFF
In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time.

See also MQTT devices - general.
See also general parameters of all function blocks.