Overview MQTT NUKI

The function block MQTT NUKI integrates a NUKI door lock. For this the MQTT interface has to be enabled at the lock and set to the broker of the controller. The block can lock and unlock the door and reports state, door sensor and battery states.

Inputs
SO Lock/unlock A value other than 0 locks, the value 0 unlocks the door.
SP Lock On a change from 0 to 1 the door is locked.
OF Unlock On a change from 0 to 1 the door is unlocked.
MO Mode Action as a numeric value directly to the lock, according to the action list of NUKI.

Outputs
NS NUKI state State of the lock as a numeric value.
NM NUKI mode Operating mode of the lock.
DS Door sensor state State of the door sensor: open or closed.
KC Keypad battery alarm Battery warning of the keypad.
NB NUKI battery charge state State of charge of the battery of the lock.
NC NUKI battery alarm Battery warning of the lock.
DC Door sensor battery alarm Battery warning of the door sensor.

Parameters

MQTT topic Topic of the device, exactly as in the MQTT settings of the device. Example: nuki/AABBCCDD
In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time.

See also MQTT devices - general.
See also general parameters of all function blocks.