Shelly 1 Mini (Gen 3/4)
Shelly 1 Mini (Gen 3/4)| The Shelly 1 Mini is a particularly small relay without power measurement for installation in a flush-mounted box. The function block switches the relay and reports the state of the relay and of the connected push-button. |
Inputs |
||
| S1 | Switch | Switches the relay. The effect depends on the corresponding parameter, see below. |
Outputs |
||
| S1 | Switch status | State of the push-button or switch connected to the device. |
| R1 | Relay status | Actual state of the relay in the device. Is also updated when switching via the Shelly app or the push-button at the device. |
Parameters |
||
| MQTT topic | Topic of the device, exactly as in the MQTT settings of the device. Example: shelly1mini-aabbccddeeff | |
| Switch | Behaviour of the corresponding input. Toggle (rising edge) for push-buttons: every change from 0 to 1 toggles the relay. Toggle (1/0) for switches and for control from the program: the value is applied directly. | |
| In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time. |
See also MQTT devices - general.
See also general parameters of all function
blocks.