Overview Shelly BLU Motion

The Shelly BLU Motion is a battery-powered motion detector using Bluetooth with brightness measurement. The follow-up time of the motion signal is set in the device itself.

Outputs
BW Motion Is set to 1 as long as the device reports motion.
HE Brightness Measured brightness in lux.
BP Battery % State of charge of the battery in percent.
BA Battery alarm Is set to 1 as soon as the battery level is 10 % or less.

Parameters

MQTT topic Topic under which the gateway script publishes the values of this device. It consists of the prefix configured in the script and the Bluetooth address, for example shelly-blu-aa:bb:cc:dd:ee:ff. The easiest way is to copy it from the MQTT diagnostics.
The values of this device do not come directly from the sensor but via a Shelly device working as a Bluetooth gateway. Setup and the required script are described on the page Shelly BLU - basics and gateway script. In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time.

See also MQTT devices - general.
See also Shelly BLU - basics and gateway script.
See also general parameters of all function blocks.