Overview Shelly Plus H&T sensor

The Shelly Plus H&T is the successor of the H&T with a display. It measures temperature and humidity, only reports on a change or in a fixed interval and sleeps in between. The timeout monitoring is therefore set to 24 hours.

Outputs
TM Temperature Measured temperature in °C.
LF Humidity Relative humidity in percent.
BA Battery State of charge of the battery in percent.

Parameters

MQTT topic Topic of the device, exactly as in the MQTT settings of the device. Example: shellyplusht-AABBCCDDEEFF
In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time.

See also MQTT devices - general.
See also general parameters of all function blocks.