Overview Shelly Plus 1PM Mini (Gen 3/4)

The Shelly Plus 1PM Mini is the particularly small version of the relay with power measurement for installation in a flush-mounted box. The function block switches the relay and supplies voltage, current, power and energy. This device does not support an addon.

Inputs
S1 Switch Switches the relay. The effect depends on the corresponding parameter, see below.

Outputs
S1 Switch status State of the push-button or switch connected to the device.
R1 Relay status Actual state of the relay in the device. Is also updated when switching via the Shelly app or the push-button at the device.
V1 Voltage V Mains voltage in volts.
A1 Current A Present current in amperes.
P1 Power W Present active power in watts.
W1 Consumption Wh Meter reading of the consumed energy in watt hours.

Parameters

MQTT topic Topic of the device, exactly as in the MQTT settings of the device. Example: shelly1pmmini-aabbccddeeff

Switch Behaviour of the corresponding input. Toggle (rising edge) for push-buttons: every change from 0 to 1 toggles the relay. Toggle (1/0) for switches and for control from the program: the value is applied directly.
In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time.

See also MQTT devices - general.
See also general parameters of all function blocks.