Overview Shelly Plus RGBW PM

The Shelly Plus RGBW PM controls an LED strip with the colour channels red, green, blue and white and measures the power. Unlike the RGBW 2 the overall brightness is set via the value brightness. The device has four inputs whose state is reported back. With the optional Shelly addon an analogue and a digital input as well as sensors are available in addition.

Inputs
EA On/off Switches the LED strip on (1) and off (0).
RT Red Red component from 0 to 255.
GN Green Green component from 0 to 255.
BL Blue Blue component from 0 to 255.
WS White White component from 0 to 255.
HE Brightness Overall brightness in percent from 0 to 100.

Outputs
EA Status on/off Feedback whether the LED strip is switched on.
RT Status red Feedback of the red component.
GN Status green Feedback of the green component.
BL Status blue Feedback of the blue component.
WS Status white Feedback of the white component.
HE Status brightness Feedback of the overall brightness in percent.
LS Power W Present active power in watts.
S1 Status input 1 State of the push-button or switch 1 connected to the device.
S2 Status input 2 State of the push-button or switch 2 connected to the device.
S3 Status input 3 State of the push-button or switch 3 connected to the device.
S4 Status input 4 State of the push-button or switch 4 connected to the device.
AI Addon analogue input Voltage at the analogue input of the addon. Only present when the addon is enabled.
DI Addon digital input State of the digital input of the addon. Only present when the addon is enabled.
T1 Addon temperature 1 Temperature of the first DS18B20 sensor, or of the DHT22 if that one is selected. Only present when the addon is enabled.
T2 Addon temperature 2 Temperature of the second DS18B20 sensor. Only with the setting "+Addon DS18B20".
T3 Addon temperature 3 Temperature of the third DS18B20 sensor. Only with the setting "+Addon DS18B20".
F1 Addon humidity in % Relative humidity of the DHT22 sensor. Only with the setting "+Addon DHT22"; the output then takes the place of T2.

Parameters

MQTT topic Topic of the device, exactly as in the MQTT settings of the device. Example: shellyplusrgbwpm-AABBCCDDEEFF

Addon Evaluation of the optional Shelly addon. None hides the additional outputs. +Addon DS18B20 shows three temperature outputs, +Addon DHT22 one temperature and one humidity output.
In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time.

See also MQTT devices - general.
See also general parameters of all function blocks.