Overview Shelly RGBW 2

The Shelly RGBW 2 controls an LED strip with the colour channels red, green, blue and white. The function block works in the colour mode of the device: the four colour values are set individually, the overall brightness via the gain value.

Inputs
EA On/off Switches the LED strip on (1) and off (0).
RT Red Red component from 0 to 255.
GN Green Green component from 0 to 255.
BL Blue Blue component from 0 to 255.
WS White White component from 0 to 255.
GN Gain Overall brightness of the colour channels in percent from 0 to 100.
EF Effect Number of the light effect stored in the device. 0 switches the effect off.

Outputs
EA Status on/off Feedback whether the LED strip is switched on.
RT Red Feedback of the red component.
GN Green Feedback of the green component.
BL Blue Feedback of the blue component.
WS White Feedback of the white component.
GN Gain Feedback of the overall brightness.
EF Effect Feedback of the set light effect.
LS Power W Present active power in watts.
EN Energy Wh Meter reading of the consumed energy in watt hours.
SI Status input State of the push-button connected to the device.

Parameters

MQTT topic Topic of the device. Devices of the first generation automatically prepend shellies/, this part has to be entered here as well. Example: shellies/shellyrgbw2-AABBCCDDEEFF
In addition to the outputs listed, the command generate addresses creates an address named timeout. It is set to 1 when the device has not sent a message for a longer period of time.

See also MQTT devices - general.
See also general parameters of all function blocks.