FG
|
Enable
|
Enable. With 1 at the input the
PWM signal is output. This input is
optional; if this input is not connected, the block is
always enabled. |
PW
|
Pulse width
%
|
Pulse width
in percent. Specifies the on-time as a percentage; this is calculated from the
parameter PWM pulse time. A value of 50% and a PWM
pulse time of 60 seconds results in an on-time of 30 seconds
and
an off-time of 30 seconds.
|
| ZE |
Time on |
On-pulse time. If the input is not connected, the time
from the parameter is used. |
| ZA |
Time off |
Off-pulse time. If the input is not connected, the time
from the parameter is used. |
PI
|
PWM
pulse
|
PWM signal
|
PZ
|
Pulse time
|
Time until the next pulse change
|
|
PWM
pulse time on
|
Pulse time in seconds for the
on-pulse
|
|
PWM pulse time off |
Pulse time in seconds for the off-pulse |
|
Percent
minimum
|
Limit of the percent input minimum.
|
|
Percent
maximum |
Limit of the percent input maximum. |
|
|
|
Pulse width modulator