Weather station Weather station| This function block
can be used to connect a weather station. The following weather stations are currently supported: ABB WES/A 3.1, ABB WES/A 4.1.1, ELSNER Multisensor RS485, Eltako MS with RS485. |
Outputs |
||
| TP | Temperature |
Temperature |
| HS |
Brightness
south |
Brightness south |
| HW |
Brightness west |
Brightness west |
| HO |
Brightness east |
Brightness east |
| DM |
Twilight |
Twilight |
| TL |
Daylight |
Daylight (in lux) |
| WM |
Wind m/s |
Wind |
| WK |
Wind km/h |
Wind |
| RE |
Rain |
Rain |
| ER |
Error |
Communication error |
| HM |
Brightness maximum |
Brightness maximum (maximum of south/west/east ) |
Parameters |
||
| Interface |
Selection of the interface. Important: Via USB converters only non-critical components may be used. | |
| Time zone
(1=AT) |
Time zone |
|
| Brightness |
Output brightness in lux or kLux | |
| Type |
Type with GPS or without. | |
| Filter analog values |
Filter analog values in seconds. Analog values are only output within this time; this parameter can be used to reduce the bus load. | |