Rain Manager Rain Manager| This function block is used to implement a simple sprinkler system. At the start of the cycle, the pump is started and valve 1 is activated; if the time has elapsed, valve 2 is activated, and so on. |
Eingänge |
||
| SS |
Start/Stop |
Rising edge starts watering, falling
edge stops watering. When the cycle is finished, a 0 is sent to the
linked address. |
| F1-X |
Enable |
Enable, only with 1 the valve is
controlled, otherwise it is omitted. If the input is not assigned,
the valve is automatically enabled. |
| Z1-X | Time in minutes | Time in minutes that the valve should be open (decimal notation, 0.5 means 30 seconds ) |
Ausgänge |
||
| PU |
Pump |
Pump |
| V1-X |
Valve |
Valve |
| R1-X |
Remaining Time |
Remaining Time in minutes |
Parameter |
||
| Number
of valves |
Number of valves | |