KNX Partition wall control KNX Partition wall control| This
function block is used to implement partition wall control. A partition
wall control is often required in conference rooms that can be divided
with a partition wall. For example, there is a partition wall and a
switch for the light at each input. If the partition wall is open, both
lights should be able to be switched on from each switch, if the
partition wall is closed, only the respective light which is in this
section should be able to be switched from the switches. For each
partition wall there are two inputs and two outputs, with each
partition wall the inputs and outputs are doubled. |
Inputs |
||
| E1 |
Input
1 |
Input Sector 1 |
| E2 |
Input 2 |
Input Sector 2 |
| T1 |
Partition wall 1 |
Partition wall switch (1 = partition wall closed) |
Outputs |
||
| A1 |
Output 1 |
Output Sector 1 |
| A2 |
Output 2 |
Output Sector 2 |
Parameter |
||
| Number of partition walls |
Number of partitions. |
|
| Filter |
Telegram
filter. This filter is required to detect duplicate telegrams by
confirmations on the KNX bus. Standard is 1 second which is sufficient
for most installations. |
|