Set/Reset

This block is used to implement a set / reset function. Depending on the requirements separate inputs SE/RS can be used or one input.

Inputs
SE	Set	With a rising edge at the input the output is set to 1.
RS	Reset	With a rising edge at the input the output is set to 0.
SR	Set/Reset	With each rising edge at the input the output is switched between 1 and 0. For example, switch on/off with a push button.

Outputs
A1	Value

Parameter
Typ		Last change has priority: If a 1 is present at inputs SE and RS, the input at which the last change was made has priority. Setting has priority: If a 1 is present at inputs SE and RS, the output remains at 1, setting has priority. Reset has priority: If a 1 is present at inputs SE and RS, the output remains at 0, reset has priority.

Inputs