KNX Telegram Output

This function block can be used to send telegrams for various changes to the input. For example, a telegram with the value 1 for a rising edge at the input and nothing for a falling edge.

Inputs
TR	Trigger	Trigger input

Outputs
A1	Variable	A variable must be connected to the output so that telegrams can be sent, connections to other function blocks are possible, but then no telegrams are sent.

Parameter
Trigger		On change: Sends the telegram on change at input. Rising edge: Sends the telegram when the input changes from 0 to 1. Falling edge: Sends the telegram when the input changes from 1 to 0.
Type On/Off		Only On: Only the value from Value output on is sent. On/Off: Only with trigger change, with input unequal 0 value output on is sent, otherwise value output off.
Output on		Alternative value for the output in state on.
Output off		Alternative value for the output in state off.

See also general parameters of all function blocks.