Übersicht Impuls Timepoint

This function block is used to send a 1-0 pulse at the output at a specific time. Unlike, for example, in the Clock function block, the pulse always occurs at the beginning of a time unit. If, for example, hour is set, the pulse is always sent at the beginning of the hour regardless of the start time, for Tab at 0:00h, for Week on Monday at 0:00h etc.


Inputs

FG
 Enable
 Enable. The pulse is only sent if 1 is at the input. This input is optional. If this input is not connected, the block is always enabled.

Outputs
I1
 Impuls 1
 Impulse when the set time has been reached.
I2
 Impuls 2 delayed
 Delayed pulse. If pulse 1 has expired, this output is set to 1 at intervals of the pulse duration. This function can be used, for example, to create a CSV file with the first pulse and send it by e-mail with the second pulse.
IZ
 Pulse time
 Current pulse duration.

Parameter
Timepoint
 Setting the time at which the pulse is triggered. Unlike, for example, in the Clock function block, the pulse always occurs at the beginning of a time unit. If, for example, Hour is set, the pulse is always sent at the beginning of the hour regardless of the start time, for Tab at 0:00h, for Week on Monday at 0:00h etc.





See also general parameters of all function blocks.