FG
|
Enable
|
Enable.
With 1 at the input the PWM signal is sent to the output. This input is
optional, if this input is not connected, the block is always enabled. |
PW
|
Pulse width [%]
|
Pulse
width in percent. Specifies the switch-on time in percent, this is
calculated by the parameter PWM pulse time, a value of 50% and a PWM
pulse time of 60 seconds results in a switch-on time of 30 seconds and
a switch-off time of 30 seconds.
|
PI
|
PWM Impuls
|
PWM Signal
|
PZ
|
Pulse time
|
Time to the next pulse change
|
PWM Pulse time
|
Pulse time in seconds
|
Percent Minimum
|
Limitation percentage input minimum.
|
| Prozent Maximum
|
Limitation percentage input Maximum.
|
|
|
Pulse width modulator