Weather station Weather station| This function block can be used to
connect a weather station. The following weather stations are currently supported: ABB WES/A 3.1, ABB WES/A 4.1.1, ELSNER Multisensor RS485, Eltako MS with RS485. Important: Support for the ABB WES/A 4.1.1 weather station is still experimental. |
Ausgänge |
||
| TP | Temperature |
Temperature |
| HS |
Brightness
south |
Brightness south |
| HW |
Brightness west |
Brightness west |
| HO |
Brightness east |
Brightness east |
| DM |
Dusk |
Dusk |
| TL |
Daylight |
Daylight (in Lux) |
| WM |
Wind m/s |
Wind |
| WK |
Wind km/h |
Wind |
| RE |
Rain |
Rain |
| ER |
Error |
Error communication |
| HM |
Brightness maximum |
Brightness maximum (maximum frpm South/West/East ) |
Parameter |
||
| Commport |
Select commport. Important: Only non-critical components may be used via USB converters. | |
| Timezone
(1=AT) |
Timezone |
|
| Brightness |
Brightness in Lux or kLux | |
| Typ |
GPS or not | |
| Filter analog values |
Filter analog values in seconds. Analog values are only sent in this time, this parameter can be used to reduce the bus load | |