Block
Presence Block
Presence| This function block is used to
implement the central switching of the presence. This function block
is linked to the control element Block
presence. See Presence
general. The presence function can optionally be used to trigger certain functions when the presence changes. Here you can set at each control element what is to happen in the event of a change. A distinction is made between the three states present, absent (short time at work) and vacation (long time). For example, it is possible to set the shading to be active when present, absent and not active when on vacation. This function block is used to switch over centrally. If the presence function is used, this block must be created once and the variables generated. The control element must then be linked to this module. This applies to all control elements from the Block area, these must always be linked with the corresponding function block, only then can functions also be executed in the background, for example time switch functions that were set on the control element. The linked control element also uses the addresses that are linked to the function block, therefore these must be linked to the function block instead of the control element, this applies not only to the switching addresses but also to the status addresses (feedback). |
Inputs |
||
| AW |
Presence |
Presence Input as byte value. 0 =
Present, 1 = Absent Short Term, 2 = Absent Long Term / Vacation. |
Outputs |
||
| AN |
Present |
At the
outputs, the status is output as a bit value, these can be linked
more easily with other function blocks than with byte values. |
| AB |
Absent |
|
| UR |
Vacation |
|