Block Scene Group

Block Function block for the control element Block Szene Group, the control element must be linked to this function block. See Block Presence and Presence general.

Inputs
SB	Start	With a positive edge at the input, the scene with the number from input number is executed.
SN	Number	Scene number which is to be executed.
Both inputs are controlled from the control element.
Parameter
Standard delay		Standard delay / pause between telegrams when executing the scene.
Delay lamella		Delay lamella setpoint for blind control elements. Optionally, a time can be specified here so that the setpoint lamella is sent with a delay. This is intended for actuators that can only execute one command. For example, if the height setpoint is sent and then the lamella, only the lamella is moved into position and the height remains at the current position. To avoid this, the maximum runtime of 0-100% height can be specified here for all blinds. This means that the height is sent to the actuator first and then the lamella after the time has elapsed.
Reset start input		This parameter automatically sets the Start input to 0 after the scene has ended.

Inputs