Block Roller shutter/blind

Block function block for the control element Block Roller shutter/blind; the control element must be connected with this function block. See Block Presence and Presence General.

The block controls a roller shutter or blind (up/down, height and slat in percent) and contains a shading automation based on the sun position: using the calculated sun position as well as the brightness and temperature inputs, the shading is activated and moved to the stored positions. In addition, a presence simulation is available.

Inputs
HE	Brightness	Brightness value for the shading automation.
TE	Temperature	Temperature value for the shading automation.
SP	Lock	Lock. When the lock is active, the reaction depends on the parameter „Action on lock“.
Outputs
LZ	Long time	Long time (drive command up/down).
KZ	Short time	Short time (step/stop command, slat adjustment).
PH	Height percent	Target height position in percent.
PL	Slat percent	Target slat position in percent.
SH	Status height percent	Feedback of the height position in percent.
SL	Status slat percent	Feedback of the slat position in percent.
ST	Status	Status information of the block.
SO	Sun height (current)	Currently calculated sun height (for the shading automation).
SW	Sun angle (current)	Currently calculated sun angle (azimuth).
Parameters
	Delay slat	Delay of the slat setpoint for blind control elements. First the height is sent and only after this time has elapsed the slat. This is necessary for some KNX actuators so that both positions are reached.
	Action on lock	No action: when the lock is active, no movement takes place. Move to off position: when the lock is active, the drive moves to the off/inactive position.

Block Roller shutter/blind

Inputs

Outputs

Parameters