Block Statistics

Block function block for the control element Block Statistics, the control element must be linked with this function block.
Please note the notes at the end of this article and the notes in the Statistics Project.

Inputs
WT	Value	Value which is to be recorded. Internal connections can also be used.
Parameters
	Max. records	Maximum number of records; if the count exceeds this value, the oldest ones are deleted.
	Trigger	Type of when the value is recorded.
	+Data point per hour	With this parameter, one additional data point per hour is recorded. This is independent of the filter settings.
	Time	Time
	Deviation	Deviation; recording occurs only when the change deviates by plus or minus.

Notes

At the start of the runtime and once per hour, a telegram is always recorded independently of the settings.
The controller has a Micro SD card as storage. In general, only a limited amount of data can be written to flash memory because the flash wears out over time. Therefore, appropriate filters should be set for the recording so that not too much data is recorded.
In the standard version, an 8GB SD card is used. For this it is recommended not to record more than 10,000 records per month.
If more data is to be recorded, the controller can optionally be equipped with an industrial memory card; with this option there are no restrictions on the records and an extended warranty on the storage medium.

Block Statistics

Inputs

Parameters

Notes