Block Statistic

Block Function block for the control element Block Statistic, the control element must be linked to this function block. See Block Presence and Presence general.

Please see the notes at the end of this article and the notes in the statistics project.

Inputs
WT	Value	Value to be recorded. Also internal connections can be used.
Parameter
Max. Records		Maximum number of records, if the number exceeds this value, the oldest ones will be deleted.
+Record per hour		With this parameter, one additional data point per hour is recorded. This is independent of the filter settings.
Trigger		Type when the value is recorded.
Time		Time
Difference		Deviation, only if the change is plus or minus deviation is recorded.

At the start of the runtime and 1x per hour a telegram is always recorded independent of the settings.
The controller has a Micro SD card as memory. Generally only a limited amount of data can be written to flash memory because the flash wears out over time. Therefore, appropriate filters should be set for the recording so that not too much data is recorded.
In the standard version, an 8GB SD card is used. It is recommended not to record more than 10,000 data sets per month.
If more data is to be recorded, the controller can be optionally equipped with an industrial memory card, with this option there are no limitations on the data sets and an extended warranty on the data carrier.

Inputs