Block Scene
simple Block Scene
simple| Block function block for
the control element Block Scene
simple; the control element can be connected to this function block.
See Block
Presence and Presence
General. In contrast to the other Block
function blocks, this block can also be used without a control element. |
Inputs |
||
| FG |
Enable |
Enable. Optional; if this
input is not connected, the block is automatically enabled. |
| SA |
Start |
On a rising edge, the scene is
started. |
| SO |
Stop |
On a rising edge, the scene is stopped. |
| SP |
Save |
On a rising edge, the scene is saved. The current values of the connected addresses are read out and saved. |
Parameters |
||
| Number of
outputs |
Number of outputs | |
| Default delay |
Delay between the telegrams. |
|
| Reset Start input | With this parameter, the Start input is
automatically set to 0 after the scene has finished. This parameter is only intended for clocks that, for example, only send a 1, so that the Start input is reset again and no second switching time is required for this. The option only remains for compatibility reasons. Since the clocks have a pulse output, it is no longer necessary. If the Start input is connected to other function blocks, for example an AND/OR operation, this parameter must not be activated. |
|